Error
Error messages indicate changes or events that did not match expected results, such as a file could not be opened or program was busy. Typically, these are critical messages and must be addressed by changing some input value before the desired operation or result is achieved.
 

<STRING> fault detected!
Base64 encoded hash is an invalid length: <STRING>
Boundary length too large: <STRING>
Call to inotify_init failed - <STRING>:<STRING>
Can not set time before Jan 1, 2000
Canceling firmware update
Cannot apply firmware because no valid firmware is available.
Cannot begin firmware update because an update is already in progress.
Cannot begin firmware update due to insufficient memory.
Cannot begin firmware upload because an upload is already in progress.
Cannot cancel firmware upload because an upload is not in progress.
Cannot delete the group: <STRING>
Cannot delete the user: <STRING>
Cannot disable or change to remote login for group <STRING>!
Cannot disable or change to remote login for user <STRING>!
Cannot get permissions for user: <STRING>
Cannot lower permissions for group: <STRING>
Cannot lower permissions for user: <STRING>
Cannot parse multipart body - content type is not multipart: <STRING>
Cannot parse multipart body - no boundary specified for content type
Cannot parse multipart body - no content type provided
CLI error initializing cli system
Command failure during layout import (<STRING>), command: <STRING>
Critical sub-component firmware version mismatch!
DIGI_COMMAND_UNION_SIZE should be increased by <STRING>
DIGI_REGISTERS_UNION_SIZE should be increased by <STRING>
Duplicate wildcard entries for URI!
Entry <STRING> has invalid message size: <STRING>
Error accepting TLS connection from client
Error allocating data for multipart parser
Error allocating memory command nodes
Error allocating memory for PCLIStruct
Error allocating receive buffer of size <STRING>, file: <STRING>
Error binding to LDAP at <STRING>: <STRING> - <STRING>
Error compiling default <STRING> layout - <STRING>
Error connecting to hwcommd: <STRING>-<STRING>
Error copying license file: <STRING> - <STRING>
Error creating encrypted password buffer: <STRING>
Error creating group filter: '<STRING>' with '<STRING>'
Error creating license request, buffer too small
Error creating license request: <STRING>
Error creating LongPollThread
Error creating mutex
Error creating new user: <STRING>
Error creating temporary file - <STRING>:<STRING>
Error creating user filter: '<STRING>' with '<STRING>'
Error decompressing NIMS response
Error decrypting bind password
Error decrypting NIMS response
Error deleting filter file '<STRING>' (errno=<STRING>, <STRING>)
Error deleting filter: <STRING> - Unable to begin transaction
Error deleting layout file '<STRING>'
Error deleting layout: <STRING> - Unable to begin transaction
Error deleting rule file '<STRING>' (errno=<STRING>, <STRING>)
Error deleting rule: <STRING> - Unable to begin transaction
Error ending layout transaction: <STRING>-<STRING>
Error executing command <STRING>: <STRING> - <STRING>
Error expected filter file identifier of (0x<STRING>) but got
(0x<STRING>) instead
Error in NIMS response. Expected bulk header id of 0x<STRING>
Error initializing <STRING> authentication
Error initializing BPFParser!
Error initializing gzip
Error initializing hardware api
Error initializing HwApi
Error initializing LDAP: <STRING> - <STRING>
Error initializing LicenseSec library!
Error initializing mutex
Error initializing TLS connection with client
Error initializing TLS context
Error initializing TLS for firmware status
Error loading command definitions
Error mapping memory
Error moving pending layout to active layout: <STRING> - <STRING>
Error opening file <STRING> for writing: <STRING> - <STRING>
Error opening file <STRING>: <STRING> (<STRING>)
Error opening mem file: <STRING>
Error parsing scp command: <STRING>, command='<STRING>'
Error populating user dn: '<STRING>' with '<STRING>'
Error reading entry <STRING>: <STRING> - <STRING>
Error reading file <STRING> contents: <STRING>:<STRING>
Error reading from HttpRequest
Error reading from stdin - read() error, errno = <STRING>:<STRING>
Error reading from stdin - select() error, errno = <STRING>:<STRING>
Error reading header (<STRING> bytes)
Error reading pending layout
Error receiving firmware update!
Error receiving response: <STRING> - <STRING>
Error releasing queued item semaphore! <STRING> - <STRING>
Error reloading auth api configuration!
Error replacing filter references '<STRING>' -> '<STRING>' in saved
filters and rules
Error replacing filter references with filter value for
filter '<STRING>'
Error saving auth config file
Error saving compiled <STRING> layout
Error saving default <STRING> layout!
Error saving filter: <STRING>
Error saving filter: <STRING> - Unable to begin transaction
Error saving rule: <STRING> - Unable to begin transaction
Error send file command for file <STRING>
Error send file command for file <STRING>: <STRING> (<STRING>)
Error sending <STRING> bytes: <STRING> - <STRING>
Error starting socket server
Error starting TLS: <STRING> - <STRING>
Error transmitting SPI data. fd=<STRING>: <STRING> - <STRING>
Error truncating file to <STRING> bytes: <STRING> - <STRING>
Error upload is no longer active!
Error with flash firmware file, aborting flash operation
Error writing <STRING> bytes - <STRING>:<STRING>
Error writing entry <STRING> (<STRING> bytes):
<STRING> - <STRING>
Error writing entry <STRING>: <STRING> - <STRING>
Error writing file <STRING> contents: <STRING>:<STRING>
Error writing header (<STRING> bytes)
Error writing NIMS key to <STRING>
Error writing to file <STRING>
Error writing to file <STRING>: <STRING> (<STRING>)
Error writing to file: <STRING> - <STRING>
Error writing to partition <STRING> - <STRING>:<STRING>
Error, HTTP Response neither handled nor delegated
Error, invalid version from server: <STRING>
Error, unexpected filter file version found: <STRING>,
type: <STRING>
Failed to import group <STRING>:<STRING>
Failed to import user <STRING>:<STRING>
FATAL ERROR! Unable to start firmware upgrade
Fatal error, unable to open SPI slave pin!
Fatal error, unable to read WS_PPS: <STRING> - <STRING>
Fatal error, unable to read WS_SLAVE: <STRING> - <STRING>
FILTER_BUFFER_SIZE should be changed by <STRING>
Firmware update is not valid, aborting.
Firmware update status socket accept error
Firmware upgrade in progress, interface not available.
FIRMWARE_BUFFER_SIZE should be changed by <STRING>
fwrite() error
Group filter
Group name larger than <STRING> bytes
Handling unknown response!
Hardware returns error activating layout
Invalid backup file
Invalid config file
Invalid data size!
Invalid event type: <STRING>
Invalid file header!
Invalid firmware finalize request - did not receive all file sections
Invalid firmware finalize request - not all sections are valid
Invalid flash file: length = 0
Invalid shared memory pointer
Invalid state for Finalize EAPMD5
Keep Connection specified for worker thread request
Kernel image size is larger than kernel partition. Image Size:
<STRING> bytes, Partition Size: <STRING> bytes,
Last system reset caused by CPU Watchdog!
Layout export is not allowed when <STRING> is powered off
Layout file exceeds maximum size of <STRING> bytes
Layout file missing signature string: '<STRING>'
Layout import is not allowed when <STRING> is powered off
Layout import syntax error with line (<STRING>): '<STRING>'
LDAP API is not initialized
License does not specify # of licensed ports
License does not specify a valid Serial #
License does not specify max # of 10Gbps Blocks
License Serial # does not match our Serial #
License specifies an invalid # of 10Gbps Blocks
License specifies an invalid # of ports
Max number of clients (<STRING>) reached!
MCU returned error transferring firmware update!
nicli: expected format: -auth <username> <password>
nicli: expected format: -cmdhelp
nicli: expected format: -cmdusage
nicli: expected format: -exportlayout <layoutname> <exportfilename>
nicli: expected format: -help
nicli: expected format: -importlayout <importfilename>
nicli: unknown parameter: <STRING>
NIMS unable to open socket to any server.
No accessor for property: <STRING>
No Group ID attribute <STRING> for filter <STRING>
No Group Name attribute <STRING> for filter <STRING>
No ping reply within one second.
No read buffer
No User ID attribute <STRING> for filter <STRING>
No User Name attribute <STRING> for filter <STRING>
Not initialized or connected, state error.
Only <STRING> can set the password for <STRING>
Ping: malloc error
Ping: packet too short (<STRING> bytes) from <STRING>
Ping: recvfrom error
Ping: select()
Ping: sendto error
Ping: unable to open ICMP socket!
Port <STRING> is over-subscribed and has dropped packets
read() error
Received flash file <STRING>, length = <STRING>
RootFS image size is larger than rootfs partition. Image Size:
<STRING> bytes, Partition Size: <STRING> bytes,
select() error
Session manager not initialized
SHA1 Hash failed for section (<STRING>)
sizeof(digiRegisters_st): <STRING>
SPI_BUFFER_SIZE is not 4096!
Switch board firmware upgrade failed!
TACACS+ Error decrypting shared secret
TACACS+ Error reading from socket: <STRING> - <STRING>
TACACS+ Error sending request: <STRING> - <STRING>
TACACS+ Incomplete response received (<STRING> bytes)
TACACS+ Incomplete response received (<STRING>/<STRING> bytes)
TACACS+ Invalid SessionId
TACACS+ Unable to connect to any remote host
TACACS+ Unable to connect to secondary server: <STRING>:<STRING>
TACACS+ Unexpected packet type: <STRING>
TACACS+ Unexpected sequence. Expected: <STRING>, Got: <STRING>
TACACS+ Unknown Authentication Method: <STRING>,
pClient->pCfg->szAuthType
TACACS+ Unknown state!
TACACS+ Unknown status: <STRING>
The filter name \"<STRING>\" is already in use
The layout name \"<STRING>\" is already in use
The rule name \"<STRING>\" is already in use
There was an error resetting the network defaults via script:
<STRING>
There was an error updating network settings via script, restart
recommended: <STRING>
Too many wildcard URI parameters
Unable to add watch to <STRING> - <STRING>:<STRING>
Unable to allocate <STRING> bytes for file <STRING>
Unable to allocate <STRING> bytes for firmware update
Unable to allocate key for <STRING>:<STRING>
Unable to allocate memory
Unable to allocate UriTreeNode
Unable to apply firmware update!
Unable to attach memory for <STRING>:<STRING>
Unable to begin firmware update
Unable to bind firmware update socket: <STRING>-<STRING>
Unable to cancel firmware update transfer
Unable to change watchdog timeout. System will reset!
Unable to copy data, size exceeds buffer
Unable to create a session for user: <STRING>
Unable to create default layout
Unable to create firmware update socket: <STRING>-<STRING>
Unable to create license request, cannot property
Unable to create license request, cannot set property
Unable to create memory for <STRING>:<STRING>
Unable to create mutex
Unable to create RADIUS authentication type: <STRING>
Unable to create semaphore
Unable to create semaphore for <STRING>:<STRING>
Unable to create temporary file (<STRING>) for layout export:
<STRING> (<STRING>)
Unable to create temporary file (<STRING>) for layout import:
<STRING> (<STRING>)
Unable to decrypt AES key for file!
Unable to decrypt TACACS+ shared secret
Unable to erase memory block <STRING>(<STRING>-<STRING>) –
<STRING>:<STRING>
Unable to erase partition <STRING> - <STRING>:<STRING>
Unable to find queue match for RequestId: <STRING>
Unable to generate unique ID for layout '<STRING>'
Unable to get board serial
Unable to get clock time - aborting LongPollThread
Unable to get network addresses: <STRING> - <STRING>
Unable to get partition info <STRING> - <STRING>:<STRING>
Unable to get the current capabilities
Unable to get the current capabilities to activate layout
Unable to get the current capabilities.
Unable to import the license.
Unable to initialize gzip
Unable to initialize recv semaphore
Unable to listen firmware update socket: <STRING>-<STRING>
Unable to load active layout.
Unable to load filter list
Unable to load layout '<STRING>': <STRING>:<STRING>
Unable to load layout list
Unable to load rule list
Unable to load the active <STRING> layout
Unable to lock mutex
Unable to lock mutex - aborting LongPollThread
Unable to lock session manager lock
Unable to open <STRING>
Unable to open <STRING> for writing: <STRING> - <STRING>
Unable to open <STRING>: (<STRING>)
Unable to open CLI config file <STRING>: <STRING> - <STRING>
Unable to open EULA.txt: <STRING> - <STRING>
Unable to open file '<STRING>' - <STRING>:<STRING>
Unable to open file <STRING> for writing: <STRING> (<STRING>)
Unable to open file <STRING>: <STRING> - <STRING>
Unable to open log file <STRING>: <STRING> - <STRING>", pszPath
Unable to open memory for <STRING>:<STRING>
Unable to open ntpd.conf file for writing <STRING>:
<STRING> - <STRING>
Unable to open partition <STRING> for validation:
<STRING>:<STRING>
Unable to open ptpd.conf file for writing <STRING>:
<STRING> - <STRING>
Unable to open semaphore for <STRING>:<STRING>
Unable to open watchdog!
Unable to open WS_PPS: <STRING> - <STRING>
Unable to open WS_RDY: <STRING> - <STRING>
Unable to open WS_SLAVE: <STRING> - <STRING>
Unable to ping gateway!
Unable to populate user data
Unable to publish capabilities
Unable to queue firmware data in time allowed.
Unable to queue version info command.
Unable to read auth configuration file!
Unable to read entry <STRING>: <STRING> - <STRING>
Unable to read EULA version from file: <STRING>! <STRING>:<STRING>
Unable to read EULA version from file: '<STRING>'! <STRING>:<STRING>
Unable to read exported layout file <STRING>: <STRING> (<STRING>)
Unable to read file <STRING>: <STRING> (<STRING>)
Unable to read logging config file <STRING>: <STRING> - <STRING>
Unable to read logging configuration
Unable to read netmask: <STRING> - <STRING>
Unable to read network address: <STRING> - <STRING>
Unable to read nitime.cfg
Unable to read properties from license: <STRING>
Unable to read time config file <STRING>: <STRING> - <STRING>
Unable to reallocate memory
Unable to release semaphore
Unable to reload log configuration
Unable to reload logging configuration, restart may be necessary:
<STRING> - <STRING>
Unable to reload time configuration
Unable to rename layout <STRING> to <STRING> - Unable to save layout
Unable to rename layout: <STRING> - Layout <STRING> already exists
Unable to rename layout: <STRING> to <STRING> - Unable to load layout
Unable to request capabilities.
Unable to reset network config
Unable to resize file <STRING> to <STRING> bytes
Unable to restart networking
Unable to return semaphores after updating counts
Unable to save compiled <STRING> layout
Unable to save device id to file - <STRING>:<STRING>
Unable to save device id: <STRING>
Unable to save general configuration
Unable to save log configuration
Unable to save network configuration
Unable to save time configuration
Unable to seek in file: <STRING> - <STRING>
Unable to seek in file: <STRING> - <STRING>:<STRING>
Unable to send Factory Clean request
Unable to send queued SPI packet!
Unable to set hostname to: <STRING>
Unable to set power options
Unable to set semaphore value for <STRING>:<STRING> to <STRING>
Unable to set the options.
Unable to set the time.
Unable to set WS_PPS as INPUT: <STRING> - <STRING>
Unable to set WS_PPS as IRQ: <STRING> - <STRING>
Unable to set WS_RDY as OUTPUT: <STRING> - <STRING>
Unable to set WS_RDY to <STRING>: <STRING> - <STRING>
Unable to set WS_SLAVE as INPUT: <STRING> - <STRING>
Unable to set WS_SLAVE as IRQ: <STRING> - <STRING>
Unable to setup watchdog!
Unable to start firmware status thread
Unable to start firmware update
Unable to start NIMS update thread!
Unable to start SPI thread
Unable to start thread
Unable to stat file <STRING>: <STRING> (<STRING>)
Unable to truncate file: <STRING> - <STRING>
Unable to unlock memory block <STRING>(<STRING>-<STRING>) –
<STRING>:<STRING>
Unable to write alerts header: <STRING> - <STRING>
Unable to write entry: <STRING> - <STRING>
Unable to write layout to temporary file (<STRING>) for layout import:
<STRING> (<STRING>)
Unable to write ntpd.conf
Unable to write partition <STRING> - <STRING>:<STRING>
Unable to write ptpd.conf
Unable to write to file '<STRING>' - <STRING>:<STRING>
Unexpected NIMS Command: <STRING>
Unexpected NIMS Mode: <STRING>
Unknown FCGI Message Type: <STRING>
Unknown firmware file!
User password larger than <STRING> bytes
User: '<STRING>' does not have any permissions defined
Username larger than <STRING> bytes
Validate: error reading partition <STRING> - <STRING>:<STRING>
Validate: SHA1 Checksum failed for partition <STRING>