system log snmp host
The system log snmp host command sets the SNMP trap server using a host name or IP address.
The SNMP trap server is required when configuring remote logging and SNMP settings.
This command is one of four used to configure sending SNMP traps of log information. The other three are:
system log snmp enable
,
system log snmp severity
, and
system log snmp community
.
You must use
system log restart
to save your changes. Use
show log settings
to check settings before making any changes.
Usage
system log snmp host <HostName|IPAddress>
Parameters
Parameter | Description |
|---|
HostName | The host name address of the SNMP trap recipient. |
IPAddress | The IPv4 or IPv6 address of the SNMP trap recipient. |
Examples
♦matrix_host# system log snmp host 10.0.64.33